Pump
Equipment
Performance
Control Panel
Engine
'FIREFLY' make single stage centrifugal Portable Fire Pump | |
Made of light weight high strength Aluminium Alloy | |
Fitted with maintenance free Mechanical Carbon Seal. | |
Suction Inlet - 75 mm British Standard Round Threads (as per IS 902) | |
Delivery Outlet - Single Outlet with 63 mm British Standard Instantaneous Female Coupling as standard (as per IS 903). Storz Coupling can also be fitted. |
|
Primer - Highly reliable 'Exhaust Gas Priming System' capable of priming from 5.0 metres within 45 seconds. |
The heavy-duty tubular steel frame fitted with four drop down type handles | |
Drain plug at bottom | |
Anti-vibration rubber mounts fitted to frame. | |
Flood lamp for night operation provided. | |
Weight (dry) - 80 kg with Recoil Type Rope Start only 90.5 kg with Battery |
Discharge (LPM) |
Pressure (bar) |
Suction Lift |
600 |
1.0 |
3.0 meters |
500 |
2.5 |
3.0 meters |
275 |
4.5 |
3.0 meters |
100 |
6.0 |
3.0 meters |
*Note - Above performance is tested at NTP conditions. If pump tested at other than NTP conditions needful allowances as per IS 942 shall be considered. |
The pump is provided with following controls | |
Engine Throttle | |
Pressure Gauge | |
Compound Gauge | |
Engine On-Off Switch | |
Primer Control |
Make - 'LOMBARDINI' make Vertical, single cylinder, four stroke | |
Engine Power - 9 hp | |
Engine Speed - 3600 RPM max | |
Air-cooled | |
Fuel - Diesel | |
Fuel Tank Capacity - 5 litre sufficient to run the pump at rated duty point for 2 hours continuously. | |
Manual Start Up - Recoil type rope start as standard | |
Battery start provision provided as standard |
Impresses With
Powerful
Operational safety
Efficiency
Versatility
Portable Pump Video